Page 153 - Textile

Textiles and Garment Construction

6. A teacher provided garment made from heavy weight fabric to be neatened at
the lower edge; suggest which type of neatening method should be used.

(a) Wide binding (b) Large facing
(c) Narrow hemmy (d) Narrow piping

7. What is the first step when cutting a crossway strip?

(a) Iron the fabric to remove creases.
(b) Fold the fabric at the corner to form 90%.
(c) Draw the position of the strips using a pencil.
(d) Mark cutting lines using pins.

8. A student came to school with a shirt finished using facing at bottom. Which
other option could be used to neaten the area?

(a) Hem and binding.
(b) Binding, hem and running stitch.

(c) Binding and piping.

(d) Hem basting stitch.

9. Match each item in column A with its corresponding item from column B

Column A Column B
(a) Folded raw edge and neatened by (i) Facing
different techniques
(b) Twice folding of the edge prevents the (ii) Hem
fabric from fraying (iii) Double folded hem
(c) The type of hem used on very light (iv) Rolled hem
fabric

Write TRUE for a correct statement and FALSE if a statement is not correct
10. Raw hem should be worked on very light fabric.
11. It is advised to use an automatic presser foot when making a rolled hem.

12. Piping is a narrow-folded strip of a fabric which is inserted in a seam to prevent
fraying of a fabric.
13. A finished binding should be seen on the right side only.

144 Student’s Book Form One Student’s Book Form One 145

20/10/2024 16:48:04
BOOK TEXTILE FINAL FINAL 20.10.2024.indd 145
BOOK TEXTILE FINAL FINAL 20.10.2024.indd 145 20/10/2024 16:48:04