Page 67 - Textile
P. 67

Textiles and Garment Construction

           ●  Slip hemming
           It is a neat way of holding hems; no                    Activity  3.10
           stitches are shown on the right side of      1.   Search and watch a video clip or CD
           the work. It is also referred to as invisible    showing how to make slip hemming
           hemming. It is used for fixing hems on           stitch.
           lightweight garments or articles. It does
           not make an obvious hemline on the right     2.   Make a prototype of a slip hemming
           side. In addition, this stitch is used to fix a   stitch.
           bound hem on heavy garments or articles.     3.   What challenge (s) did you face
                                                            when making up slip hemming and
           Procedure for working on slip hemming            what measures did you take to solve

           (i)     Fold the fabric towards the wrong        the challenge (s)?
                 side of the fabric to make a hem; raw   (b)  Blanket stitch: This stitch is used
                 edges should be invisible. Fix the   for making thread loops, eyes and belt
                 hem with tacking above the folded    carriers. It can be used to make bar tacks
                 edge of the folded fabric.
                                                      and decorative finishing along a fabric
           (ii)   Insert the needle into a folded edge   edge. It is worked over raw edges from
                 and slip it through about ¼ inch     right to left, with the edge held away from
                 before bringing it out again. Work   the worker. It is best to use embroidery
                 a few stitches backwards to fasten   thread or yarn when doing a blanket stitch
                 off.                                 since this is a decorative stitch, and a thick

           ●  Vertical hemming                        thread stands out more. Match the weight

           It is a strong method because a minimum    of the thread and the fabric. Choose the
           amount of thread is exposed to wear and    colour that matches or is different from
           tear. It is worked from right to left.     the fabric.
           Procedures for working on vertical         Procedure for working on the blanket
           hemming                                    stitch
                                                      (i)   Prepare the fabric and thread the
           (i)    The needle picks two threads in the      needle.
                 garment and then passes behind the
                 folded hem to emerge for the next    (ii)  Fasten on with backstitches.
                 stitch.                              (iii)   Insert the needle from the wrong side

           (ii)   Then rise the needle vertically to       of the fabric and bring it to the right
                 pick two threads in the garment for       side of the fabric. Pull the thread
                 the next stitch.                          all the way through. Hold onto the
                                                           thread as you pull so that the short
                                                           tail does not become unthreaded.






 58  Student’s Book  Form One  Student’s Book  Form One                              59



                                                                                          20/10/2024   16:47:25
     BOOK TEXTILE  FINAL FINAL 20.10.2024.indd   59
     BOOK TEXTILE  FINAL FINAL 20.10.2024.indd   59                                       20/10/2024   16:47:25
   62   63   64   65   66   67   68   69   70   71   72