Page 164 - Textile_and_Garment_Form3

Textiles and Garment Construction

(vi) Trim the seam allowance, neat the (b) Attaching the pocket pieces on the
raw edges of the pocket and press it. side seam before making the seam

(i) Cut two pieces of pocket sections with C.B
seam allowance about 1cm. In case C.F
Second section seamed Stitching taken of the left and the right hand pocket,
to turnings across turnings cut four pieces of pocket sections.

(vii) Press the seam of the garment open
and turn the pocket to the wrong
side.
Dotted line show
position of pocket
gap

Small bar
tacks

(vii) Clip the garment seam allowance
above and below the pocket and press
the seam open. (ii) Mark the position of the pocket on
the garment.
(viii) Reinforce the upper and lower edges
of the pocket mouth on the right side
of the garment. Press the completed (iii) With the right side facing each
pocket. other, place two pieces of the pocket
on top of the marked position Procedures for working on in-seam
of the pocket, tack and stitch it. pocket cut as an extension of the garment

(iv) Place the front and back part of the (i) Cut two pieces of the garment with
garment with the right side facing and an extended section of the pocket.
each other, tack, and stitch it along
the seam and around the pocket.

(v) Turn pocket by inserting it on
the right side of the garment.

(vi) Trim the seam allowance, neat the
raw edges of the pocket and snip
or clip at the corner of the lower
and the upper edges of the pocket.

Student’s Book Form Three 155

2022/11/17 16:15:25
BOOK TEXTILE FINAL 13.09.2022 FINAL.indd 155 2022/11/17 16:15:25
BOOK TEXTILE FINAL 13.09.2022 FINAL.indd 155