Page 54 - Textile_and_Garment_Form3

Textiles and Garment Construction

(iii) Clip the neck turning at the centre
front. Trim and layer the turning

clip

(iv) Turn the facing to the right side.
Work out the seam edges, tack and
Figure 3.2: Box-pleat opening edge stitch.
Procedures for working on a box-pleat (v) Turn under the free edge of the facing
opening and edge stitch.
(i) Cut the facing the required width
of the box pleat plus the turnings.

The length should be the same as the
length of the bodice.

Activity 3.1

1. Draw a diagram which shows the
(ii) Place the right side of the facing to position of a continuous wrap opening
the wrong side of the garment right in the garments.
side of the facing should face the 2. Make samples of continuous wrap
wrong side of the garment).Tack openings and then file up your work
and stitch from the centre of the in the portfolio.
neck edge down to the front edge.

Student’s Book Form Three 45

2022/11/17 16:14:35
BOOK TEXTILE FINAL 13.09.2022 FINAL.indd 45 2022/11/17 16:14:35
BOOK TEXTILE FINAL 13.09.2022 FINAL.indd 45