Page 119 - Textile_and_Garment_Form3
P. 119
Textiles and Garment Construction
(i) Cut the bias strips. Decide how
wide the bias strips should be,
then cut a few strips with an
angle of 45 degree, as shown.
Figure 5.13 (a): Piped collar and cuff
(ii) Fold the strip half in length wrong side
facing each other and press it with an
iron. In this position, the bias strip is
ready for adding between the edges
of a fabric.
Figure 5.13 (b): Piped seam
Figure 5.13 (c): Piped roll collar
Procedures for working on piping
without a cord
(iii) Attach the piping to the edge of
the fabric using a sewing machine.
110
Student’s Book Form Three
2022/11/17 16:15:08
BOOK TEXTILE FINAL 13.09.2022 FINAL.indd 110
BOOK TEXTILE FINAL 13.09.2022 FINAL.indd 110 2022/11/17 16:15:08
