Page 114 - Textile_and_Garment_Form3

Textiles and Garment Construction

Procedures for working on curved
facing

(i) Place the right side of the facing strip
to the right side of the garment, raw
edge together. Tack and stitch 6 mm
from the raw edges.

stretch
(iv) Edge-stitch the outer edge of the
faced edge from the right side.
On the inner edge, edge-stitch
facing and hem it to the seam.

Procedures for working on straight
facing
(ii) Snip turnings and the lower edge of
the facing diagonally. The diagonally (i) Place the right side of the facing
snips allow the turning to overlap strip to the right side of the garment.
inside convex turnings and spread Tack and stitch 6mm from the edge.
inside concave ones.

(ii) Turn up the facing strip along
stitched line and tack into position.

(iii) Turn the facing on the wrong side,
tacking along seamed edge. Make
a narrow turning on the free edge
of the facing and tack it leaving
it unattached to the garment.

Student’s Book Form Three 105

2022/11/17 16:15:05
BOOK TEXTILE FINAL 13.09.2022 FINAL.indd 105
BOOK TEXTILE FINAL 13.09.2022 FINAL.indd 105 2022/11/17 16:15:05