Page 135 - Textile_and_Garment_Form3
P. 135
Textiles and Garment Construction
R.S back
R.S front
Completed self-neated shirt collar
W.S facing
Attaching a collar with facings
(i) Prepare the facing on the top of (iii) Mark the centre of the inner edge of
the collar around the neckline + collar.
2.5cm (or cut a crossway strip long
enough for the neckline) from one (iv) Attach the collar to the garment
facing edge to another facing edge (bodice) with under collar on the
plus 2.5cm for seam allowance. right side of the garment. Match the
raw edges, fitting lines, notches and
the centre back of the bodice and the
collar.
facing
(ii) Join the front and back facing side at the
shoulder seams to align with the seam
line, stitch and trim it. Press and neaten
the outer (free) edge of the facing.
(v) Tack and machine it in position
Back (vi) Attach facing and tack it over the
collar, right sides facing each other,
Front overlapping facing equally at each
side end.
(vii) Start machining from one end of the
neck edge to the other.
126
Student’s Book Form Three
2022/11/17 16:15:13
BOOK TEXTILE FINAL 13.09.2022 FINAL.indd 126 2022/11/17 16:15:13
BOOK TEXTILE FINAL 13.09.2022 FINAL.indd 126
