Page 145 - Textile_and_Garment_Form3
P. 145
Textiles and Garment Construction
Angle sleeve
Bell sleeve (short) Figure 7.2 Various types of set-in sleeve
Procedures for preparing set-in sleeve
(i) Make two rows of gathering
stitches between the notches on
either side of the 6mm from the
fitting line leaving threads hanging.
Bell sleeve (long)
(ii) Ease stitch the cap of the sleeve 1.5
Notch
cm from the raw edge and leave
the thread loose. For puffed sleeve,
prepare the gathers by machine or
hand as discussed earlier in Chapter
Two. The gathers should be done
Puff sleeve 6mm away from the fitting line.
The gathers should be made before
joining the side seams of the sleeve.
Bishop sleeve patterns
136
Student’s Book Form Three
2022/11/17 16:15:16
BOOK TEXTILE FINAL 13.09.2022 FINAL.indd 136 2022/11/17 16:15:16
BOOK TEXTILE FINAL 13.09.2022 FINAL.indd 136
