Page 146 - Textile_and_Garment_Form3

Textiles and Garment Construction

(v) Neaten the raw edges by zigzag
or overclock stitch. Press the
seam open if open seam is used.

(iii) Fold the sleeves into half, the right
sides facing each other pin and tack.

(iv) Remove pins and machine 1.5cm

from the row edge then remove the
tacking thread.

R.S

Attaching a set -in sleeve to the garment
First row of The process of attaching sleeve to the
stitching on bodice can be done successfully if the
seamline
Second row sleeve is attached in a right way. The
of stitching
1
6mm ( )from bodice and the sleeve should be prepared
seamline 4 before setting in the sleeve. The following
Sleeve cap procedures have to be observed:
(i) Turn the sleeve right side out and the
bodice turned wrong side out.

Student’s Book Form Three 137

2022/11/17 16:15:17
BOOK TEXTILE FINAL 13.09.2022 FINAL.indd 137
BOOK TEXTILE FINAL 13.09.2022 FINAL.indd 137 2022/11/17 16:15:17