Page 147 - Textile_and_Garment_Form3

Textiles and Garment Construction

Shoulder seam

Bodice back

Bodice front

Under seam
(iii) Remove pins and machine the
sleeve to the bodice 1.5 cm from
the raw edge. Remove the tacking
Outside-sleeve thread and trim the armhole.
cap eased into Finish the armhole with loop
rounded shape
stitches, overcasting or crossway
binding if the material frays easily.

(ii) Take the sleeve and place inside the
armhole, ensure to match the side seams
with the right side facing each other.
Match the sleeve cap notches with
the shoulder seam. The notches on
the sleeve should be matched with the
notches on the bodice pieces, pin then
adjust the fullness to fit the armhole by
pulling on the loose threads from ease Turming in
stitches. Tack along the fitting line. position for
pressing open
Shoulder
seam

Bodice back sleeve
sleeve
Double stitched
Bodice front Tacking stitches W.S front W.S back section

Underarm seam

138
Student’s Book Form Three

2022/11/17 16:15:18
BOOK TEXTILE FINAL 13.09.2022 FINAL.indd 138
BOOK TEXTILE FINAL 13.09.2022 FINAL.indd 138 2022/11/17 16:15:18