Page 85 - Textile_and_Garment_Form3
P. 85
Textiles and Garment Construction
(iv) Tack the loops in the appropriate (viii) Press carefully to avoid making
positions on the fitting line. imprints on the outside of the
garment.
Activity 4.4
Make samples of Rouleau loops and
keep them into portifolio.
Worked loops: These loops are sewn on
faced slit openings. You must complete
the faced slit opening and then sew on the
buttons before working the loops.
(v) Attach and stitch the facing or bias
strip on one side of the garment to Procedures for working on worked loops
cover the raw edge of the loops. (i) Mark the position of the loops
on the right side of the article.
(ii) Tack a stiff piece of a paper to the
opening for a support while working
the loops.
(iii) Put a pin on the paper in the centre
for the loops.
(iv) Make long stitches between both ends
of the loops, keeping these stitches
round the pin.
(vi) Turn it to have the wrong sides facing
each other and press them to lie flat.
(vii) Fix buttons evenly spaced on
the other side of the opening and (v) Remove the pin and hold the loops
confirm that they are directly together by making loop or buttonhole
opposite the loops. stitches close together round the loops.
76
Student’s Book Form Three
2022/11/17 16:14:52
BOOK TEXTILE FINAL 13.09.2022 FINAL.indd 76
BOOK TEXTILE FINAL 13.09.2022 FINAL.indd 76 2022/11/17 16:14:52
