Page 83 - Textile_and_Garment_Form3
P. 83

Textiles and Garment Construction

             (ii)  Place the Velcro to the position and   Rouleau loops are worked side by side
                pin/tack.  The  hook  section  (firm   with  or without  covered  buttons.  They
                or rough layer) should be attached    are normally used to fasten slit opening
                to the upper wrap and the looped      and  in  bridal wearer  to  fasten  the  back
                section (soft layer) to the under wrap.  of the garment. Refer to Figure 4.14
                                                      (a). These types of loops include evenly
             (iii)  Machine to the edge all around
                the  Velcro or hem strongly.  The     spaced and varied spaced loops and
                thread used should match in colour    should be of the same sizes throughout.
                and texture with stitches that will   Refer to Figure 4.14(a), (b) and (c).
                appear on the right side of the work.

                                          Border
                                          on strip




                                         No turning
                                         on cut edge
                     W.S     The harder strip
                The softer strip
                                                         Figure 4.14 (a): Rouleau loops on slit
                                                                       opening
           Button loops

           Button loops are used with button to
           close openings; they are mainly for both
           functional  and decorations purposes.
           Loops and buttons are suitable for a slit         Figure 4.14(b): Spaced loops
           opening. Loops are made from narrow
           flexible  tubes  of  a  fabric  material  with
           either contrasting colour or the same
           colour and texture of the fabric. Button
           loops are normally attached to the edge
           of a garment. There are two categories of            Figure 4.14: (c) Unspaced loops
           loops for fastening buttons namely worked
           loop and fabric loops or Rouleau loops.    Procedures for working on fabric loops

           Rouleau loops: Rouleau loops are more      (Rouleau loops)
           decorative  and are prepared  with small
           loops made of cording or piping.  This      (i)   Cut a crossway strips 2.5 cm wide.
           fine  closure  narrow  tube  or  traps  takes    (ii)    Prepare a narrow strip of a fabric on
           the place of a buttonhole and works well         the bias strip. The length and width
           with light or medium weight fabrics.
                                                            should be  twice the required length
                                                            and width of the turning plus 2mm.


                 74
                                                               Student’s Book  Form Three




                                                                                          2022/11/17   16:14:51
     BOOK TEXTILE  FINAL 13.09.2022 FINAL.indd   74                                       2022/11/17   16:14:51
     BOOK TEXTILE  FINAL 13.09.2022 FINAL.indd   74
   78   79   80   81   82   83   84   85   86   87   88